Electric Fireplace Wall Hanging Ideas
Contrary to traditional wood or gas fireplaces Wall-mount electric fireplaces are ready to be installed right out of the box. These fireplaces can be an excellent way to add ambience to your home without the need for remodeling or venting.
However, they usually require care in installation due to the fact that they're typically heavy. Follow these steps to hang your brand new electric fireplace in the correct way.
1. Connect the Brackets
A wall-mounted electric fireplace or recessed fire instantly transforms any room. It's the ideal option for homes with no existing fireplace opening or apartment living.
Choose where you'd like to put your electric fire. It's important to find an area that isn't susceptible to moisture and is at a minimum of just a few inches from drapes, furniture, and areas that are prone to traffic. Mark the wall with layout marks to indicate the top and bottom plates for the fireplace frame.
Use a drill or other tool to make exploratory holes in the wall. Find studs using a stud-detector and mark the wall with the position of the fireplace mounting brackets. Then, you can build the wall or patch and paint the drywall to prepare it for your fireplace installation.
Depending on your chosen wall-mounted fireplace, you could be required to install the screen and firebox as one unit or separate them with a wall bracket. If you're unsure about your capability to tackle this task on your own, think about hiring a general contractor or experienced carpenter.
There is a template included with most electric fireplaces. However it is recommended to keep a spirit level handy and a pencil to mark the exact location where the wall brackets will be erected. Make use of the template to ensure that the power cable of the fireplace can be connected to a nearby outlet in order to connect it.
Install drywall as smooth and flush as you can to give the fireplace a sleek look. Add a piece of trim to the bottom edge and then paint and sand the entire frame for an attractive look.
Most wall-mounted electric fireplaces have hooks or slots on the back of the unit which you will insert into the slots or hooks on the mounting brackets. Make sure you make sure that the slots or hooks are aligned prior to connecting the fire brackets. Once the fire is set you can add other elements like driftwood logs, crystal embers, or decorative rocks.
2. Check the Bottom Bracket
The space above a fire, mantel or chimney breast is a prime spot for hanging artwork. But, there is a fine line between an artistic arrangement and one that distracts from the overall look of the fireplace's design.
Generally, the rule of the thumb is that a painting should be about 80 percent the size of the fireplace or mantel it is placed above. This will ensure that it is proportional and make it look good on the wall. This rule of thumb could be affected by other ornaments and decorative pieces on the mantel.
If you are planning to hang a photo above your electric fire the frame must be constructed of glass or a material that is able to withstand high temperatures. If you're unsure, a quick test with a cloth that is heat-sensitive will reveal whether the frame is suitable for this kind of installation.
The most common issue with displaying pictures above the fireplace is the possibility of damage to artwork due to smoke or other heat sources. This is not a problem with gas or wood-powered fireplace. However, if you plan to use an electric wall fire, it's important to check the manufacturer's instructions.
Most electrical fires have mounting brackets that can be fixed to the wall with hanging screws or wall-mounted fixing systems. If the latter is the case, it is recommended that you drill exploratory holes in a discrete part of the wall prior to when you begin mounting your electric fire. Afterwards you can utilize a cable finder and pipe to verify that there aren't any pipes or cables within the vicinity of your chosen mounting position.
If they are the electrical sockets, you can decide to place your fire on top of the electrical socket or move it to a different spot. If you move it to a different location you'll need to make sure that the power cable will reach from the fire to the electrical outlet - this is especially important for older houses or homes with solid walls. Otherwise, your electric fire won't perform as it should. Some models include a template that indicates where to drill holes for this purpose, while others require a spirit level and pencil to mark the appropriate locations on your wall.
3. Connect the Power Cord
You may have to move your plug socket in front of the unit if you have installed a fireplace with a recess. white electric fire wall mounted can give it a cleaner appearance. Check the fireplace first to make sure it works correctly.
The third way to mount an electric fireplace is by framing the space and building it into the wall. This gives you a classic style, a polished look, and allows for the installation of a mantel. The owner's manual for the particular model will include information about framing, securing the fireplace, and wiring.
If you're ready for mounting your new wall-mounted electric fireplace, start by marking the installation location with a marker or pencil. Then, use a carpenter's level to ensure that the location is level and flat. You can also use a stud finder to mark the location of studs so that you are sure that you're drilling in a safe area.
Use your electric drill after having marked the installation location to create holes for the bracket screws or hanging screws. Make sure to adhere to the exact directions in your owner's manual for this step, especially if you're installing the fireplace in wall. If you're unsure of how to go about it you can always consult a professional to take care of the installation for you.
You can also conceal power cords away from view using cable organizer kits. These kits usually come with sleeves, clips or boxes to bundle cables. You can make use of fish tape or wire snakes to guide the cords. If you do not want to cut the drywall, a Powerbridge kit can offer a cleaner and more secure connection.
Finally, you can camouflage the wires by painting them with paintable covers or by tacking them to the wall and skirting boards. Keep the cover or tacks far away from sources of heat. This will shield the cord from being damaged and will also prevent accidental contact.
4. Connect the adapter
A wall-mounted electric fireplace is an excellent option for a home renovation or for those who don't have the space or money to put in a gas fireplace. They are simple to hang and come ready to use right from the box. They are a wonderful alternative for those who are looking for a chic modern accent or the warmth that the fire can bring. They can be hung on any wall like artwork, and they're electric with fan-powered heat.
It's a great idea to make an inventory of the tools and equipment you'll need before you begin the installation process. You can find detailed instructions on how to install an electric fire in the user's manual. Some models will require you to screw the brackets directly onto the wall while others might feature an installation plate that can slide into slots or hooks that attach to the mounting brackets. If you're installing a recessed unit it is important to ensure that all combustible materials are taken from the area of installation. As a general rule they should be kept 3 feet away from the front side of the fireplace and 1.5 feet away from its sides.
After you have inspected all the components After you have checked all the components, plug in your electric fireplace and make sure it is working. This is an important step because it will guarantee that the flame effect screen and heater work according to the specifications. This will also provide you with an idea of how the product will look in its final configuration.
When you're sure that your electric fire is working properly, you'll want to think about covering the power cord. This will keep the finished product neat and neat. You can do this by using paintable wire covers or you can choose to install an outlet that allows you to put the cord behind the unit. This will give your fireplace a seamless finish.